-
08-04-2021 #1
New to the forum, came here because everything else seems US based and not always the best place for advice.
I run a 3040 cnc ballscrew version and use it to make parts for model ships.
Now I have just run into what could be best described as a bad issue..
I have a damgaged Z axis ballscrew that needs replaces (endstop switch failed.. Broken wire)
Now I;m having issues find a UK supplier of 150mm SFU1204 12mm Ballscrew. I mean no where can I find one.. ?
I know the UK no has issues with the brexit situation but heck ,, Im at a loss..
anyone know who would have one ?
-
08-04-2021 #2
eBay was looking at them myself just last night, longer than you need but on that length of screw you can get away with not supporting the floating end...simply lop it off where you need it.
Link: https://www.ebay.co.uk/itm/353435740939.Me
-
09-04-2021 #3
Thanks I must have searched hi and low.... found one of the correct length now from china :( so will see how that works out with customs... maybe will get the longer one from the link you provided "just in case"
I appreciate you taking the time to answer cheers...
-
09-04-2021 #4
I have a spare 1204, 300 mm long not machined if any use
I have used the supplier that Lee mentioned quite successfulyLast edited by johnsattuk; 09-04-2021 at 10:59 AM.
-
09-04-2021 #5
-
09-04-2021 #6
I presume that you would also need a thread and a reduction for your coupling, if you can provide details, I have a lathe
-
09-04-2021 #7
thats an amazing offer thankyou ..
the total length is 145mm
top diameter 8mm x 20mm
bottom 8mm x8mm
would that work for you and how much deliverd .. I asume your UK tooLast edited by flotsam; 09-04-2021 at 07:37 PM.
-
09-04-2021 #8
Hi
Is there no thread involved,is 145mm the thread length or the O/A length. Will the nut fit, my nut is 35mm O/A, the flange is 8mm thk x 40 dia. x 30mm A/F, the body is 22mm dia. the nuts/screws are not allways interchangeableLast edited by johnsattuk; 09-04-2021 at 08:38 PM.
-
09-04-2021 #9
overall length is 145mm 8mm at the lower section to fit the bearing, the top section is also 8mm and 20mm long,
the flange is square 8mm thick ( I have posted photos)
the body is 22mm dia.
the nut is 36mm long
https://photos.app.goo.gl/11azQFAJPcgnGtzz8Last edited by flotsam; 09-04-2021 at 09:04 PM.
-
09-04-2021 #10
trying to upload to here,, wont work is there a file size limit?https://flic.kr/s/aHsmVcSX4L
loaded to google and flikr not sure which would be best for youLast edited by flotsam; 09-04-2021 at 09:16 PM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
NEW MEMBER: Hello everyone, bespoke spectacle maker in London pulling my hair out.
By Worshipfulspectacles in forum New Member IntroductionsReplies: 13Last Post: 23-11-2019, 02:33 AM -
pulling my hair out with cam
By universally in forum CAD & CAM SoftwareReplies: 6Last Post: 09-04-2015, 01:41 PM -
Hair growth device. DIY version
By gavztheouch in forum Electronic Project BuildingReplies: 16Last Post: 30-03-2014, 08:55 PM -
AM882,s and Mach3 ......plus hair removal !!!
By Buba b in forum Motor Drivers & ControllersReplies: 3Last Post: 26-10-2012, 05:11 PM -
Heelp! Dual axis steppers.. Losing steps.. Pulling hair out..!
By fasteddy in forum Motor Drivers & ControllersReplies: 9Last Post: 14-05-2010, 02:32 PM
Bookmarks