Threaded View
-
17-04-2021 #12
Last Activity: 21 Hours Ago
Good to see you succeeded!
Can you fit some of those telescopic covers in your machine setup? I bought some from AliExpress recently for my lathe - they are available in a wide range of diameters and lengths. My Shizuoka had them from new and nothing gets close to the ballscrews.
https://www.aliexpress.com/item/2040...41a84c4dNrCmN6
The part numbering system is Dmin-Lmax-Lmin-Dmin where the Dmin and D max are the diameters of the ends of the telescopic springs. Lmax and Lmin are the max and min lengths. For my machine I got a couple of 20-600-40-36 (you need 2 per ballscrew usually).
-
The Following User Says Thank You to Muzzer For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rotating Ball nut
By drumsticksplinter in forum Lead Screws, Nuts & SupportsReplies: 30Last Post: 12-05-2020, 08:01 PM -
BUILD LOG: Rotating Nozzle
By Peter3102 in forum DIY Router Build LogsReplies: 0Last Post: 25-11-2019, 11:09 AM -
WANTED: Rotating Nut Fixture x2
By PaulP in forum Items WantedReplies: 13Last Post: 02-01-2018, 10:50 PM -
Rotating ball nut
By D-man in forum Projects, Jobs & RequestsReplies: 0Last Post: 21-03-2015, 08:39 AM -
BUILD LOG: New build.Stell frame cnc 1500X1000.Ball screw and gearing calculations
By ba99297 in forum DIY Router Build LogsReplies: 12Last Post: 03-09-2013, 10:37 PM
Bookmarks