Thanks for your "kind" comments. I hope it should be good. Especially because what I didn't mention is that I have a degree in engineering, and I've run business units worth £MM. So I know a bit about running a commercial operation, margins, profitability, etc. I also didn't mention that I've built my own furniture and fittings, including having designs cut in egger board by a local CNC shop and I just sold my property for over £950K with these in it. I also know some CAD software and that a CNC machine to "test with" would cost £10K+. Probably I put this message out the wrong way. What I really need is a garage with a CNC machine and an expert that I can work with so we can experiment and iterate the designs and see if we can make them scalable. Maybe I will totally fail and lose everything, but I have some real interest and passion for it so at least I will give it a go. My enthusiasm means I started on the wrong foot so now I will find another way to move forward.