Advice on converting Machine Code from Imperial to Metric

[johnsattuk]

Or use Discriminator to multiply your axis and feeds by 25.4 and do a save as, 30 secs tops. still got your origional file and not had to reconfigure your M/C

[JAZZCNC]

Or use Discriminator to multiply your axis and feeds by 25.4 and do a save as, 30 secs tops. still got your origional file and not had to reconfigure your M/C

The short-sighted approach, in my opinion, literally takes 2mins to create a new profile. You are not reconfiguring the machine just making a few simple adjustments to a completely separate profile, his original config isn't affected at all.
Then from that point on no messing around in a separate program is required, you just load the imperial profile when cutting imperial code.!! . . . Simplzzzz