. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-05-2021 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    What happens exactly.? Does it try to start up then give the over-current error or does it just trip straight away.?

    PD14 and PD15 are the only ones you are interested in, Set both to 20 just to eliminate it's not them causing the error. If it works then set PD14=5 and PD15=10, these figures will work.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Haunyang VFD input voltage
    By JamesUS in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 18-01-2015, 08:25 PM
  2. THC Setting Issue?
    By Davek0974 in forum Plasma Table Machines
    Replies: 8
    Last Post: 17-10-2014, 07:53 AM
  3. Setting my table up...
    By Davek0974 in forum Plasma Table Machines
    Replies: 23
    Last Post: 10-03-2014, 08:24 PM
  4. setting up a business
    By dstivens in forum Opportunities Available & Sought
    Replies: 5
    Last Post: 16-05-2013, 10:28 PM
  5. setting the origin
    By Fivetide in forum Computer Software
    Replies: 9
    Last Post: 04-02-2013, 12:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules