Greetings from Denmark.
Hi every one.
I have recently finished my cnc router and could use some help.
Have not been able to home my gantry automatically.
I am running with MACH 3 and NVUM V2 usb interface.
All 3 axes have their own home sensor and in addition the slave also has. Has two steppers on Y axis. (A as a slave). Everything moves perfectly and home everyone works too. First Z, then Y and finally X. The problem is that the system does not look at A home sensor. I have manually moved A axis about 10 mm further away from home, but when I try to home Y then the gantry does not straighten so it is at a perfect 90 * angle.
In the diagnostics screen I can see all 4 home sensors separately.
What am I doing wrong?

Kind regards Laszlo