Dead Spindle Motor

[[email protected]]

Hi Muzzer
Many thanks for your reply, I have taken the motor apart and what appears to have happened
is one of the brush container parts (the positive side) has somehow made contact with the
comutator, you will see from the photo that the motor is without a doubt dead.
I have also attached a photo of the motor body which measures 178mm long including the
ER11 tool holder and 57mm diameter it is 200w dc (I think) with a speed range from 0 to 8000rpm.
It has 2 power cables connected by spade connectors one on each side (positive and negative)
I have been unable to get a motor matching the above but I would like a slightly better one if at
all possible? I hope I have attached the pictures correctly.
Best Regards
Roy