Quote Originally Posted by ptjw7uk View Post
Well nothing really just that I have just come to the decision that there is no REAL information available for stepper motors and their use.

Hi Peter
How true
I started with too little then worked my way up to too much. Fortunately I never fell in to the smaller size motor trap, just didn't seem to be enough leverage on the armature. I never had ride that snake which leads all the way back to square one :whistling:

OTOH, not all wasted, I now have gash motors and drivers left over to cnc my lathe.

Robin

PS: Gary, seeing as how you are bound to read this, your ISM6045 encoder, is it 12 volts in 5 volts out?