Quote Originally Posted by GREG021 View Post
Hi All

I m hoping someone can point me in the right direction for a weird problem I have with my control.
Using UCCNC and separate drives for each axis.
If I try to jog say in Z, the Y and X move together. Some axis will only move in one direction sometimes not at all.
I have rechecked my wiring and all seems okay to me, I have also changed the BOB.
Please can someone point me in the right direction for tracing the problem?
You are not saying which UC controller you have, but my guess is that something is wrong with your configuration. Anyway, not enoug facts here.