will it work or not

[m_c]

Motor details can be found at https://www.omc-stepperonline.com/ne...m-4-wires.html
Only 1.26Nm stall torque, so at the less powerful end of Nema23 steppers.

If you already have the motors, just try them.
Worst case scenario, you have to swap them for more powerful motors and possibly drivers depending on what you have just now.

[erniehatt]

Hi thanks for the reply.
Yes I do have the motors, but no problem I can use the elsewhere.
I am looking at Nema 23 3Nm 4 amp units.
Whats the thoughts on these.

[erniehatt]

I have bitten the bullet and ordered the motors, just hope they are suitable, if not it looks as though it's for the Bin, I have over spent as it is.