Quote Originally Posted by Kitwn View Post
When I recently moved from using LinuxCNC to UCCNC it was said that it is not possible to auto-square a two-motor axis using software settings in UCCNC as it is in LinuxCNC. I've done some test today to show that this is not the case.
Think that was me who told you that and strictly speaking it doesn't work like Linux CNC because it doesn't have the flexibility in that you can control each motor separately in the positive or negative direction which is what I was mostly meaning. But as you have found it can be done in a round-about way and still end up with similar results but I strongly urge people to square the gantry manually rather than rely on offsets that twist other components like ball-screws and place binding on linear rails etc.

When you get into the bowls of UCCNC and its powerful scripting then you can make it do pretty much whatever you want. (provided you can program in C#)