Thread: Build in Progress
-
08-06-2021 #1
Attachment 30049
This is as far as I have got so far.
All axis run very free, very happy with that.
One thing I need answers with is on the Z,X axis, It is very heavy, between sixteen and seventeen pounds, that is not including the Spindle, which is a 2.2 kw model, not sure of the weight of that yet.
My concern is, are the motors, 2X Nema 23 3Nm 4.2 amps going to be strong enough to lift it, or would it be better to have the motors push it up ,or pull it up.
Hope someone can help me on this one.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Build in Progress
By erniehatt in forum Linear & Rotary MotionReplies: 0Last Post: 08-06-2021, 05:04 AM -
Further Progress with my JazzCNC .. Guitar Body
By BeeceUK in forum Woodworking Project ShowcaseReplies: 7Last Post: 23-04-2021, 06:25 AM -
CONVERSION: AMAT25LV / PM25V slow progress but at least it's started!!
By dazp1976 in forum Conversion Build LogsReplies: 0Last Post: 10-05-2019, 11:54 AM -
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks