Ballscrew & Linear Rail Kit - Any Good

[A_Camera]

Thanks A Camera

You're welcome.

I had noticed that all the converted ones that i had viewed that they had to create some sort of spacer block, but yes, i was waiting for the arrival of the parts, i think holistically first, so then have to work backwards to get all the joined up bits to work.

Yes, some sort of spacing or other solution is necessary. It is definitely easier to figure out a solution once you have them in front of you, especially if you are not used to read mechanical drawings, but also if you are open to changes and can divert from your own design.

So i see what i want to achieve and how the look is perceived in my minds eye, then have to work backwards to achieve what i am seeing.

My issue is that i don't work to plans and do everything 'off the cuff' sort of speak, which can be a bit problematic!

WoodKnot

I also don't spend hours and weeks in front of a computer to CAD a machine. I think that's a lot of wasted time, unless you want to reproduce and sell those things. Every new machine is a prototype. I make sketches using good old pencil and paper, but even those are free hand sketches, rarely use a ruler for drawing. It's enough for me to have the design sketched and the details in my head. Of course, this results in a few extra holes, but so what...

Anyway, I received this today:



So far so good. What's funny is that the kit included four carriages. I have no idea how they are thinking... 200mm rails and four of those means basically no movement at all or maximum 46mm. I knew this when I ordered, I only need one on each rail, but this was the best price, so now I have two spares. BTW, even this BK feels fine to me, and I still think it is best to leave it as it is and replace the bearings with AC once these are worn out, if they ever will before I die or stop using it.