Thread: Cnc 1610
-
23-06-2021 #1
Greetings I have CNC 1610 with an AnnoyTools PCBoard running Candle 1.1.7 software. It is connected to a HP desktop with Intel Core2, Win10, 4G ram.
Mostly have control of the CNC1610 until I turn on the spindle @ 200RPM or higher. The Candle looses connection with the 1610. It works ok @100RPM. I have to unplug and re-plug the USB cable for the two talk.
I did on an other HP desktop it worked fine but would sometimes stop in the middle of engraving a large piece.
-
24-06-2021 #2
USB doesn't have very good interference protection, and I'm guessing the spindle is generating a lot of electrical noise.
You could spend a lot of time tracing the problem, but as a first attempt, I'd suggest trying a USB isolator.
This is the first one I found via a search to give you an idea of what to search for - https://www.ebay.co.uk/itm/324127452071Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
1605 or 1610 for Inlays wood
By gborislav in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 05-07-2021, 09:53 PM -
WANTED: 1610 Ballscrews
By diycnc in forum Items WantedReplies: 3Last Post: 07-02-2020, 06:40 PM -
Please can someone help me with my 1610 mini desktop cnc
By DesktopCNC in forum General ElectronicsReplies: 27Last Post: 03-07-2017, 11:14 PM -
1605/1610 have they sent the wrong ones?
By kingcreaky in forum Lead Screws, Nuts & SupportsReplies: 4Last Post: 30-07-2013, 09:22 PM -
Stiff 1610 ballscrews, need help.... asap.
By ccmarco in forum Lead Screws, Nuts & SupportsReplies: 10Last Post: 05-12-2010, 10:01 AM
Bookmarks