Although at work we use 3-phase, sell equipment all based on 3-phase, it is something i have never used myself -

So in terms of electrical connections for 3 -phase, I would not know where to start.

When i converted the garage in my workshop I installed all the sockets (at least 15 doubles) and all the lighting.

But, as per the regs, got an electrician to fully test and complete the installation for full approval.

Maybe some more guidance from the guys on the forum that have gone down that route.

That does sound like the next big part of the project and one I will make sure that i have the full backing of prior to making any purchases.

I have purchased the power pack for the motors and the motors themselves - but that's it.

I want the frame built and completed now before i move on.

WoodKnot