OpenBuilds Style Build

[JAZZCNC]

Hi Jazz

Have you got a link to see what I am looking at and what sort of cost please?

So i presume that the VFD is separate to the inverter -

Do i need a qualified electrician to install of of this? Considering that we can only add spur these days!

WoodKnot

You don't need a Water-cooled spindle but they are SOOOOOOOO much better than a standard router, with far less noise, stronger power, continuous duty cycle.

I sell them as a Kit only, this includes 2.2Kw ER20 Spindle, Huanyang VFD, 1 to 13mm Collet set, Spindle mount, water pump with the pipe. £265 + postage.
You will also need a shielded CY cable from VFD to Spindle which we can supply at £1mtr cut to length and will solder the VFD connector on free of charge.

You don't need any special wiring in the workshop and they will plug straight into a 13A supply if required. Occasionally, if you have a sensitive MCB in your Fuse box you may need to change the type from B to C MCB but this tends to happen mostly in very new properties and not very often.