Hybrid View
-
01-03-2022 #1
Last Activity: 19-05-2025
Good luck, it's your turn to do it. I will never have an ATC on my machine since I have no need for it, nor is my machine big enough for that. If I ever change or add anything, it will be for my DIY lathe, but currently no real plans for that.
Originally Posted by dazp1976
All we need now is an ATC screen with image of a carousel, L, R + spin buttons, draw clamp I/O, and anything else that's needed or can be thought of.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
UCCNC has lost it's screen file...
By Voicecoil in forum CNCdrive (UCCNC)Replies: 7Last Post: 27-01-2020, 02:26 AM -
My UCCNC probing screen and macros
By A_Camera in forum CNCdrive (UCCNC)Replies: 6Last Post: 13-01-2019, 04:19 PM -
My Probe screen forUCCNC is available now for download
By A_Camera in forum CNCdrive (UC100, UC300ETH)Replies: 1Last Post: 10-10-2017, 07:58 PM -
Edge Probe + tool length probe on same input
By Noplace in forum General ElectronicsReplies: 1Last Post: 18-06-2016, 11:12 AM -
BUILD LOG: Version 0.1
By SirMorris in forum DIY Router Build LogsReplies: 7Last Post: 11-08-2007, 02:52 PM
Bookmarks