Thread: Cnc Router
Threaded View
-
03-07-2021 #1
Looking to sell my cnc router as i need to buy a house
All aluminium construction on a steel base and fully enclosed for dust reduction.
20mm hiwin rails on all axis
roughly 900*600*150 work area
2.2kw water cooled spindle with delta vfd
auto tool measuring
1610 ballscrews on all axis
will rapid at 10000mm/min reliably ant cut at 7500mm/min
it comes with a 4th axis, just needs the driver
powered by a uc300eth motion controller
will run mach or uccnc software currently running uccnc (its much better than mach)
4nm steppers 8 wires, wired bipolar parallel
it cuts wood, plastics, and soft metals eg brass and aluminium easily.
looking for around £3750 with the laptop that runs it or can do a deal without the laptop (msi gp62)
https://1drv.ms/u/s!AkI3bots4KH5zCdS...XMHRo?e=rVrdqP
pics and a video are in the link above
im based in cornwall so a bit out of the way.
any questions please ask or other photos etc.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Production grade CNC router Vs Homebuilt CNC router advice
By SweetAs in forum New Member IntroductionsReplies: 27Last Post: 16-02-2019, 12:06 PM -
Denford router - Brushed router too brushless spindle - Help and advice please
By Tom B in forum Brushless Spindles & MotorsReplies: 4Last Post: 16-05-2016, 09:13 AM -
what router can i use with openbuild ox gantry router?
By davejavu123 in forum OpenBuilds OX CNC MachineReplies: 5Last Post: 13-08-2015, 01:40 PM -
eBay: CNC Router - EXELCNC HD1013 - Heavy Duty CNC Router
By Deuce_Coupe in forum Items On eBay UKReplies: 0Last Post: 16-07-2014, 11:46 AM
Bookmarks