Quote Originally Posted by terry1956 View Post
It’s much more controlled. The fog buster from the states cost just over £200 in all. It came with 4 foot of tube between the coolant tank and the nozzle. Not much for a milling machine, ok for a lathe. The fitting got the nozzle tube was cheaply made and always slipped. The fog buster I made cost a total of £30. It allowed two nozzles to be used at the same time allowing good chip removal. And I also had a air blast gun included. Building your own is an easy job. I have now gone over to flood coolant.
Ye that's ok for you but some people like me, where time is money, haven't got time to mess around sourcing and building add-on's and calling a product next to useless just because it doesn't live up to what you need isn't really fair IMO.
The fogger buster does exactly what says it does and works very well, if you have a need for extra pipe length or more nozzles then that's for you to ask or request, but for anyone who just wants a hassle-free setup then it does work very well.