Missing information for Mach3 settings

[dazp1976]

Ideally I would like to have 8 inputs if using Mach3. That way I could control the homing on a slaved axis, all the limits and also run 4 relays that would make the THC standalone work better. My 1500mm wide mill has ballscrews with stepped down belts and it works great. That machine is controlled with Estlcam and has a lot of spare inputs.

If you prefer seperate equipment: UC400eth + 2 of whatever bboards you desire/prefer. 24out/10in
Go all out with the UC300eth Max from cncroom: (uc300+ ub1 + ud1 + license). Around 36out/49in.
If prefer all in one type: The AXBB-E. 16out/6in. Has port3 standard LPT for a further 12out/5in (use IDC26-DB25 cable with cheap bob).

Gives you options of using Mach3 / 4 or UCCNC.