AXYZ parts book and availability of parts

[dazp1976]

If the motion control system fails, roughly what does it cost to replace the original with the UCCNC system you mentioned?

It depends on your needs. Work out how many I/O you need then you know your options.
CNCdrive do a deal evry so often where you get a controller, bboard, cables & license in a bundle.
http://shop.cncdrive.com/index.php?categoryID=174

I bought a UC300eth, 2*UCBB's, license, a bunch of extra cabling, and some other small bits.
Cost me £260 + £60ish to import it. Pretty much futurproofs the machine tbf.

Or go all out with a UC300eth max from cncroom (UC300, UB1, UD1, license).
https://cncroomx.com/en/product/uc300eth-max/


I would've got away with a UC400 but I recently got a servo for a spindle change on the mill.
I want to separate everything to it's own dedicated inputs like the limits, faults, encoder. Worked out at 17 inputs needed.
The next plan is tool changer etc on the second board and servo's on all axis (but I may never get that far).