Help needed, new to cnc and having cut depth issues

[routerdriver]

Which leads to two possibilities;either the Z datum is incorrect or the machine does not have sufficient travel.If you use the process described by JazzCNC in post #4 it should do the job.Do you understand how to change the Z datum for the progam?

[JAZZCNC]

Which leads to two possibilities;either the Z datum is incorrect or the machine does not have sufficient travel.If you use the process described by JazzCNC in post #4 it should do the job.Do you understand how to change the Z datum for the progam?

I think you are having a conversation with the wrong person, Dean isn't the OP, I think you have got crossed wires.!

[Dean jeffery]

Yeah nothing wrong with mine I was just showing a picture of the process for the OP as sometimes pictures are easier to understand