For Sale Boxford 250PC CNC lathe

[frsservices]

Boxford 250 PC CNC lathe with 8 station automatic tool changer

Includes 3 jaw chuck not shown in photos

Does not come with any computer or software but works perfectly in manual mode.

Will need converting to MACH3 or some other software system. I can put you in touch with people who can convert the machine for you for around £500.

This is a very capable machine. It has all the desirable features as follow.

Operates of 240 volts household mains current

Fully enclosed so no swarf going all over the place.

Internal light.

8 station automatic tool changer

In built coolant system

Central lubrication system.

Machine controlled by a PC and not a dedicated inbuilt control system expensive if it goes wrong.



PLEASE NOTE. THE LAST 2 PHOTOS SHOW THE MACHINE SPECIFICATION FOR LATER MODELS.

THE MODEL 250 PCI IS AN UPDATED MODEL OF THE ONE I HAVE FOR SALE.

THE WORKING SIZES AND SPINDLE BORE OF THE OF THE 250PCI ARE APROXIMATELY THE SAME AS MINE.





The machine is for pick up only and you will need a van with a taillift which can lift at least 1000KG and a couple of strong people. Machine on stand weighs around 700KG

It is in the back of my van at the moment. I can show it working in my van with you keeping your distance. You can back up your van to the back of my van and bring the tail lift up level with the back of my van. I can then transfer the machine from my van into yours using my pallet truck.

LOOKING FOR £2295 OVNO


ANY QUESTIONS. PHONE BOB ON 07854500851.

[Jink123]

Did this sell?