Thread: USBCNC 4 AXES with PIC18F4550
-
24-05-2010 #11
-
24-05-2010 #12
-
15-06-2010 #13
really nice software
usb cnc i get my licence
i build the pcb its very easy to build it
from
http://www.planet-cnc.com/
im from tunisia if some 1 need more info contact me
-
14-07-2010 #14
Hi, im new here,
i need to build one,
if i build the board, buy the pc software,....how can i program the PIC-ic ? is the IC program free? its in *.bin or *.hex
where can i get one?
-
14-07-2010 #15
to program the PIC you need a programmer and you can download the firmware for the PIC for free from the planet CNC site. Programmers cost between 20 and 50USD on ebay, the cheap ones plug into a parallel port, the more expensive (like microchip's PicKIT2) are USB.
Or you can by the PIC ready programmed for 11Euro and since you are buying the software this would be the easiest and cheapest way to do it...
-
20-10-2012 #16
Hi Andrej
I have a Proxxon MF70 that I cnc'ed using a usb controller (4axis mk 1 I think) and generally i have been very happy with it and the software. I have a problem with G2 and G3 circular interpolation. No matter what I do I seem to be only able to make a quarter circle from say x0 to x10 y0- y10 with a 10mm rad. To go from x10 - 20 y10 - y0 10mm rad is mostly ok but going from x20 - x10 y0 - y-10 and
it starts making snake patterns and looses location of 0 datum point. I don't have any problem doing very detailed engraving and linier interpolation. Hope you can help.
Phil Gravett (Philcraft Steam)
-
20-10-2012 #17
Hi
Please send your .settings and problematic g-code to my email.
Andrej
-
25-08-2020 #18
-
25-08-2020 #19
-
01-09-2020 #20
Grbl with stm32 is working good . But u need skills to program it and electronics to make board .
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
My new 4 axes wood processing CNC router...
By florins in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 07-12-2021, 10:42 PM -
FOR SALE: Galil Motion Controller - PCI DMC 1842 - four axes
By lateAtNight in forum Items For SaleReplies: 1Last Post: 24-06-2014, 03:41 PM -
EMC2 or USBCNC?
By icedfusion in forum Machine Control SoftwareReplies: 9Last Post: 12-02-2013, 04:04 AM -
SWAP: Looking to swap this USBCNC board
By John S in forum Items For SwapReplies: 8Last Post: 12-08-2011, 08:27 AM -
Usbcnc
By Web Goblin in forum EdingCNC (USBCNC)Replies: 40Last Post: 12-08-2011, 06:38 AM
Bookmarks