Thread: USBCNC 4 AXES with PIC18F4550
-
06-12-2009 #1
Hello all
During i've found this website :
http://rc.cis.si/projects/cnc_motion/
i've download the PCB and the firmware, i've start to build my card, but some component are missing, i will need to buy it and after to do the test.
when i will finishing i will share you how it's working
have a nice day
Bigfoot08
-
06-12-2009 #2
That looks pretty cool!
-
01-01-2010 #3
-
04-01-2010 #4
Hello esilviu
it's really pretty cool and nice job.
good work and i wish you a happy new year
-
03-05-2010 #5
esilviu , you have done great job. I too believe that it takes a lot of work in software part. I am also building it but stuck at one place and I think it would be great if you send me eagle files as I really need them to solve my problem.
-
03-05-2010 #6
Hello,
Eagle schematic (complete) can be found on the http://www.planet-cnc.com/ site, DIY section. You can design your own board based on that schematic. I have already altered my PCB, so it's best for you to make your own board. It's just a matter of placing and routing components.
Hope to see soon pictures with your board. If you are unsure about something, post here the question or brd file to take a look.
By the way: I suggest you to buy software while it still cost 70eur.... At this moment it is in full evolution, it is fully usable and new things are added every day! So it’s not fair that price to remain that low, when next competitor is about 300Eur....
-
08-05-2010 #7
Hello
If anybody needs any assistence with controller of software I'll be glad to help.
Andrej
-
13-05-2010 #8
Hi
If anybody needs assistance with controller I can help.
Andrej
-
22-05-2010 #9
So, in other words: "Can anyone pirate the software for me".
Yeah. Sure. Whatever.
Eagle PCB is available for free, but has a limited board size (80x100mm). Looking at the boards that have been produced from the schematic, then they're a bit bigger than this. There is a free trial version for 60 days which can allow 100x160mm - I think that the boards will fit in this size. Look for the Freemium version.
Note that the full version of Eagle costs significantly more than 64 Euros though! Although I'm not sure if you're talking about Eagle or the CNC software itself. Either way - whatever.
Just had a look at the shop, so I guess you're talking about the CNC software itself...Last edited by tribbles; 22-05-2010 at 12:29 PM.
-
22-05-2010 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
My new 4 axes wood processing CNC router...
By florins in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 07-12-2021, 10:42 PM -
FOR SALE: Galil Motion Controller - PCI DMC 1842 - four axes
By lateAtNight in forum Items For SaleReplies: 1Last Post: 24-06-2014, 03:41 PM -
EMC2 or USBCNC?
By icedfusion in forum Machine Control SoftwareReplies: 9Last Post: 12-02-2013, 04:04 AM -
SWAP: Looking to swap this USBCNC board
By John S in forum Items For SwapReplies: 8Last Post: 12-08-2011, 08:27 AM -
Usbcnc
By Web Goblin in forum EdingCNC (USBCNC)Replies: 40Last Post: 12-08-2011, 06:38 AM
Bookmarks