USBCNC 4 AXES with PIC18F4550

[Deremi]

Hello all

During i've found this website :

http://rc.cis.si/projects/cnc_motion/

i've download the PCB and the firmware, i've start to build my card, but some component are missing, i will need to buy it and after to do the test.

when i will finishing i will share you how it's working

have a nice day

Bigfoot08

The above link could not be opened

[Doddy]

The above link could not be opened

The thread is 8 years old. There' little reason these days to DIY a controller. Either PC with software or a GRBL board off eBay (and I'm not recommending the latter).

[berin]

The thread is 8 years old. There' little reason these days to DIY a controller. Either PC with software or a GRBL board off eBay (and I'm not recommending the latter).

you can find that link here
https://web.archive.org/web/20091221...ts/cnc_motion/ you may have to try different dates FYI... but the links are there and the files are there.