. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-09-2021 #8
    Paul001's Avatar
    Lives in London, Lithuania.
    Paul001
    Last Activity: 09-09-2021 Has been a member for 3-4 years. Has a total post count of 5.
    Ok its same thing after unplug A01 and 5V it show 0.1 mV then its of and 5.0 mV than turn on with any Sxxxx speed. Then imputing speed in MACH3 it instantly jump to it and drop down to 0, then i press start button in software spindle start spin but only on low RPM and VFD show 133.33 and going down and up in software do nothing. Guess need some where set what pin use to output speed?
    Edit.: Ad pic of monitor of AXBB and looks like it knows that spindle are running 133.33 or 31% of 400 Mhz. So guess i missing something on MACH3 or what?
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: Mach3 in out.jpg  Views: 427  Size: 797.9 KB  ID: 30411  
    Last edited by Paul001; 02-09-2021 at 03:28 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. AXBB-E any opinions?
    By ngwagwa in forum Motor Drivers & Controllers
    Replies: 12
    Last Post: 21-07-2021, 04:32 PM
  2. moving from Mach3 to AXBB
    By ngwagwa in forum CNCdrive (UC100, UC300ETH)
    Replies: 5
    Last Post: 12-04-2020, 10:01 AM
  3. looking for a pendant to work with Cslabs ip-m mach 3
    By charlieuk in forum CS-Lab (CSMIO)
    Replies: 7
    Last Post: 22-09-2017, 03:56 PM
  4. Cheap CNC breakout board for controlling spindle speed, will this work?
    By ROBCNCAU in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 04-08-2016, 02:48 PM
  5. Mach lathe spindle speed control
    By GeoffV in forum Artsoft Mach (3 & 4)
    Replies: 7
    Last Post: 21-05-2014, 08:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules