. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-09-2021 #7
    Paul001's Avatar
    Lives in London, Lithuania.
    Paul001
    Last Activity: 09-09-2021 Has been a member for 3-4 years. Has a total post count of 5.
    Thnx for advice, will try in next hour. Doing windows reinstall, maybe its MACH3 problem. Then wires are connected to V1 and 5V0 get to 0.1 mV and than spindle turn on get up to 5.0 mV. Had open AXBB and if jumper are on its 10V. So looks like need set PD070 > 0 .
    And had find on this forum https://en.industryarena.com/forum/a...d--410222.html that connected to input 5V0 and it works for him.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: AXBB Jumper.jpg  Views: 322  Size: 398.8 KB  ID: 30410  
    Last edited by Paul001; 02-09-2021 at 02:18 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. AXBB-E any opinions?
    By ngwagwa in forum Motor Drivers & Controllers
    Replies: 12
    Last Post: 21-07-2021, 04:32 PM
  2. moving from Mach3 to AXBB
    By ngwagwa in forum CNCdrive (UC100, UC300ETH)
    Replies: 5
    Last Post: 12-04-2020, 10:01 AM
  3. looking for a pendant to work with Cslabs ip-m mach 3
    By charlieuk in forum CS-Lab (CSMIO)
    Replies: 7
    Last Post: 22-09-2017, 03:56 PM
  4. Cheap CNC breakout board for controlling spindle speed, will this work?
    By ROBCNCAU in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 04-08-2016, 02:48 PM
  5. Mach lathe spindle speed control
    By GeoffV in forum Artsoft Mach (3 & 4)
    Replies: 7
    Last Post: 21-05-2014, 08:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules