Quote Originally Posted by dom74 View Post
Ok great thank you for the response
As i see both looks the same , i think u need the one with servo and atc , i will get the one who weights more , because there is more mass and i think is more rigid .
Now i look at datasheet and seems olimpus is way rigid than m5s, and if i where u i will go straight to olimpus , because it weights 50 percent more than m5s , this will help u with rigidity and finish on cutting .
I dont think u need a 9kw spindle if u cut only 6mm plywood , a 5kw will do same job .
U need servo , and spindle to have 24000 rpm , and up down mill cuter bit .