Warco WM 18 conversion or pro built MC?

[dazp1976]

Hi
Have many people successfully converted a manual mill such as my Warco WM 18 to CNC? Or would I be better of buying ready made like Denford etc? I am no electronics wizard, I want to do light motorcycle and model engineering projects in a small home workshop. CNC4YOU do kits that are quite expensive and not sure they work well. Budget 2-3k.

I've done an Amadeal AMAT25LV.
1605 screws with double nuts. It is pretty solid. All bearing carrier and nut components custom.
Basically you need a mill to convert a mill, lol.

If a light machine is all you need then prob get pre built. It will have low limitations though, steel components a delicate long process.