-
17-09-2021 #1
Hi everyone,
I'm new here, and I'm a bit of a 'newbie', so to speak.
I had an unfortunate issue with the laptop that ran the CNC software for my Spartan PJCM1325-3 machine, and unfortunately lost all the data. I have managed to re-download the programme and everything okay - however I am missing the parameters file to link the CNC software with the machine itself.
I originally purchase the machine from a company called Radecal but these went bust a few years ago, and the company that took over - Mantech - are struggling to find the required file.
So I'm hoping there is somebody somewhere on here who owns/has owned one of these machines who could share the .dat file with me, or suggest an alternative method of getting this going again!
Any help whatsoever would be hugely appreciated, thanks for you time.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
UCCNC has lost it's screen file...
By Voicecoil in forum CNCdrive (UCCNC)Replies: 7Last Post: 27-01-2020, 02:26 AM -
Spartan 1325-3 cnc machine
By calibanman in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 02-07-2015, 12:04 PM -
File upload problems - attachments file extension support !
By Swarfing in forum General DiscussionReplies: 14Last Post: 08-03-2013, 02:37 PM -
G4 Dwell parameters
By mmcp42 in forum Programmers CornerReplies: 10Last Post: 31-12-2010, 04:49 PM
Bookmarks