800Hz single phase vfd

[JAZZCNC]

Hi All,
Let's just say I have a 4 pole 24k rpm 3.2kw water-cooled ATC spindle and a single phase 240V supply (no 3phase).
Can anyone suggest some affordable (or just any?!) 800hz VFD options that would be capable of driving it??

Any recommendations and advice please, my searches are thus far not very fruitful.

Try Sunfar, they do a range of VFDs that go up to 1,000Hz in both single and 3 phase. I have an E300 on my spindle and it's worked well for over 18 months. BTW what spindle are you using plse? I'm toying with the idea of going to ATC.

This might interest you both.!

We sell and use Sunfar (Simphoenix) VFD's with our range of high-end 40K ER20 2.2Kw spindles and ATC spindles. We have the E300 branded as Sunfar for the 2.2Kw 800hz spindles and E550 branded Simphoenix for 3.5Kw 800hz ATC spindles. (Simphoenix is another trading name for Sunfar).

Voice coil: Careful when buying ATC spindles because not all are the same, even when they spec the same.? I have fit many of the Chinese spindles and most range from OK to complete rubbish. It's taken me a long time to find a supplier in China that produces a top-notch spindle which I'm obviously not going to share on the forum. However, we do offer them for sale, they are not cheap but they are the best quality high torque with ceramic bearings and low runout.

We have on stock 3.5Kw 36K rpm ISO25 ATC but can supply from 2.2Kw right up to 40Kw with various rpm's and tapers plus options like Encoders and thru coolant, flanged or unflanged.

Get in touch if you are serious about ATC because these are the Dog's danglies.!

Bongo: Same get in touch if you want a price for the VFD. Again they are not the cheapest but they are good solid reliable drives.