800Hz single phase vfd

**Voicecoil** · 20-09-2021

I bought a 4 pole spindle as they were available as a constant power type, couldn't find those in a 2 pole type. It's proved to be a good choice giving more torque at lower rpm meaning you can fair chomp through stuff with larger cutters but still get good power at high rpm with smaller ones. Just wish I could find a similar thing with ATC.

**JAZZCNC** · 20-09-2021

Originally Posted by Voicecoil

Just wish I could find a similar thing with ATC.

Your wish is granted, just get in touch and I'll give you a price.
We even have a range of Permanent Magnet synchronous ATC spindles ranging from 8Kw/5.5Nm to 36Kw/52Nm torque which will give high torque at very low rpm's.