just a rough template here but if the machined end ballscrew is 20mm what would be a decent amount of clearance on this adjustable plate? would you have the hole cut out at 20mm for tight fit so then the ball screw can be adjusted back and forth like i have done in the pic or have the hole slightly bigger then 20mm so it can also be adjusted up and down slightly?

probably better ideas then what im doing here but cant find any designs ideas to look at as most are using bk supports.


Click image for larger version.  Name: ballscrew fixed end.jpg  Views: 159  Size: 133.6 KB  ID: 30481Click image for larger version.  Name: ballscrew fixed end2.jpg  Views: 164  Size: 94.7 KB  ID: 30482