Hi,

I read through a couple of threads here and decided to go for the CSMIO IP-S and Delta ASD-A2 drives.
Im now at the point where I want to set up precise homing.

I used this wiring scheme: https://de.cs-lab.eu/precise-homing-on-index/
Unfortunately im getting an error message that no index pulse could be found. I investigated with a DSO and found out that im only getting 1 pulse per rev on the OCZ (measured on the minus pin from Input 25). I set the parameter to 500.. playing arround with gears etc,. wont change it. Its fixed at 1 pulse per rev.

In the manual I couldnt find anything except that it seems to be 1 Pulse in speed control mode. But it isnt in that mode.

Does anybody have a hint where my mistake here might be?

Thanks a lot in advance!