z axis not working

[hoopy]

Hi Phill thanks for getting back to me only have pins 1-4
have put 24v to 24v wire also -V to dcm dcm to one connection for probe attached plate to In1
on configure ports and pin set port to No3 and pin to No1 set active low as well
Kevin

[phill05]

You got me now I don't know that board the only thing I do know is in Mach Probe it states you can only use pins 10,11,12,13, and 15, maybe some one with more knowledge of this usb board will come in to help.

I think you will find Mach 3 will not work very well on usb it seems to be better run on the older Parallel Port boards.

Phill