240V VFD to power 110V motor

[Chaz]

Not sure about that. In my experience (limited), the VFD's voltage output is pretty much set. For example in my 9100 VFD, they offer some tuning of the output but its like 380-410, not anything that would allow me to half the voltage.

That said, why not try one, set it down 110V and use a dummy load and measure what it outputs.

[m_c]

Not sure about that. In my experience (limited), the VFD's voltage output is pretty much set. For example in my 9100 VFD, they offer some tuning of the output but its like 380-410, not anything that would allow me to half the voltage.

That said, why not try one, set it down 110V and use a dummy load and measure what it outputs.

VFDs vary voltage according to frequency, so at below motor rated speed, they're reducing voltage anyway, it's just that I'm not sure it'll be as simple as changing a single parameter.
If I had a standard VFD surplus, I would try it and see, but I've not just now.