The bench top is the main top, then another top that measures exactly 1000mm x 1000mm that the CNC frame sits on.

The CNC frame has then been fastened down to the top plinth and then i have cut the waste board to fit within the rails.

I have wired the motors and run those under the table top into the drawer unit - although I am not entirely satisfied with this option and may go for a dedicated side hung cabinet?

Click image for larger version.  Name: 20211102_210254.jpg  Views: 699  Size: 109.1 KB  ID: 30632

Click image for larger version.  Name: 20211103_210040.jpg  Views: 775  Size: 103.0 KB  ID: 30633

Click image for larger version.  Name: 20211103_210124.jpg  Views: 751  Size: 106.2 KB  ID: 30634

WoodKnot