step and dir pulse problem Mach3

[Neale]

Looking at the first two images, I'm concerned about the polarity of the supply to the stepper driver. It appears to show a black wire to +ve and red to -ve, although the 24V supply to the AXBB is correct. I can't see where these wires go on the power supply.

[JAZZCNC]

Looking at the first two images, I'm concerned about the polarity of the supply to the stepper driver. It appears to show a black wire to +ve and red to -ve, although the 24V supply to the AXBB is correct. I can't see where these wires go on the power supply.

Doesn't look like that on the images I'm looking at.? Maybe need to zoom in.?

Edit: Sorry just spotted you mean the OP pics, not the ones I posted last night. Yes looks wrong but depends on what it's like at the PSU.? Logic says its wrong

[Neale]

I had replied to OP before I read your post, Jazz. Sorry about confusion.

Indeed, it depends on PSU connections at the other end of the wires but it's a disaster looking for somewhere to happen!

[mrmacca]

I had replied to OP before I read your post, Jazz. Sorry about confusion.

Indeed, it depends on PSU connections at the other end of the wires but it's a disaster looking for somewhere to happen!

Same as in psu lol cant afford this to smoke.