Quote Originally Posted by mrmacca View Post
im nearly there I think with wiring my Axbb-e , just got a few more questions.

Do I need to wire on off switch, if I do …how, or can I just plug in without it.
Wires coming from L1 AND L2 from back of VFD were do I locate these.
Is it ok to loop my 5v power supply from my 24v power supply or should I use separate supplies.
Cheers for all the advice and help..

Click image for larger version.  Name: 20220219_221341.jpg  Views: 373  Size: 233.6 KB  ID: 30880 Click image for larger version.  Name: 20220219_221330.jpg  Views: 337  Size: 320.2 KB  ID: 30881 Click image for larger version.  Name: 20220219_221321.jpg  Views: 341  Size: 259.7 KB  ID: 30882 Click image for larger version.  Name: 20220219_221430.jpg  Views: 369  Size: 178.5 KB  ID: 30883 Click image for larger version.  Name: 20220219_221312.jpg  Views: 349  Size: 321.8 KB  ID: 30884 Click image for larger version.  Name: 20220219_221420.jpg  Views: 355  Size: 156.2 KB  ID: 30885
I assume you mean loop the mains input to the supplies. That is no problem, just do it carefully. I would advise using the correct size crimped spade terminals rather than trying to twist several mains wires together.

You can have a mains on/off if you wish. I use a 4 way dis-board with individual switched outlets with separate feeds for the AXBB-E 5V/12V supply and the 36V motor supplies.