. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 21-02-2022 #12
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by mrmacca View Post
    Cheers, a latching system would be good if you could do me a diagram
    Attached pic. colours might not match yours but should show you how it's done.

    Edit: Note that you need a contactor rated to suit the PSU which turns on the drives. Don't use a Relay if you are switching DC to the drives.

    Click image for larger version.  Name: Latch E-stop.png  Views: 366  Size: 14.7 KB  ID: 30889

    Quote Originally Posted by mrmacca View Post
    as for the VFD the wires are coming from L1 and L2 and i cant remember what they were attached to
    They are the Mains Input so put Live to L1 Neutral to L2.


    Quote Originally Posted by mrmacca View Post
    What about fans i have 2 were do i connect these.
    Need to know more about the fans.
    Last edited by JAZZCNC; 21-02-2022 at 10:43 PM.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Z axis out by 2mm mach3 or fusion360 problem?
    By Richardtweed in forum Machine Discussion
    Replies: 21
    Last Post: 01-05-2022, 08:41 PM
  2. Mach3 lathe spindle pulleys problem
    By John11668 in forum Artsoft Mach (3 & 4)
    Replies: 32
    Last Post: 30-01-2021, 03:04 PM
  3. Small Mach3 Problem
    By needleworks in forum General Discussion
    Replies: 8
    Last Post: 11-05-2020, 10:46 AM
  4. Mach3 & V-Carve Problem
    By Ricardoco in forum Computer Software
    Replies: 2
    Last Post: 31-05-2013, 12:53 PM
  5. Mach3 small problem
    By dudz in forum Artsoft Mach (3 & 4)
    Replies: 7
    Last Post: 15-11-2012, 05:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules