. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 25-02-2022 #29
    dazp1976's Avatar
    Lives in coventry, United Kingdom.
    dazp1976
    Last Activity: 14-01-2024 Has been a member for 6-7 years. Has a total post count of 424. Received thanks 31 times, giving thanks to others 1 times.
    Quote Originally Posted by mrmacca View Post
    Must be blind i cant find it
    Vfd Wiring diagram is on this page:
    http://whzoncn.com/m/view.php?aid=83
    You can see the loop and the break of the switches.
    (ignore the 0-10v,, it's showed for pot use).

    Mach3 plugin here:
    https://www.cncdrive.com/AXBB.html
    It's the ucx00 auto installer file.

    The jumper is inside the AXBB-E top cover.
    Easy way to test first is if you midi M3S24000 and the max the spindle spins is only around 12000rpm then it is likely jumper set as 5v (half speed).
    UNLESS.... Your spindle full speed is less than 24k. If so, set full speed in midi and see if you get half or full rpms.
    Last edited by dazp1976; 25-02-2022 at 09:03 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Z axis out by 2mm mach3 or fusion360 problem?
    By Richardtweed in forum Machine Discussion
    Replies: 21
    Last Post: 01-05-2022, 08:41 PM
  2. Mach3 lathe spindle pulleys problem
    By John11668 in forum Artsoft Mach (3 & 4)
    Replies: 32
    Last Post: 30-01-2021, 03:04 PM
  3. Small Mach3 Problem
    By needleworks in forum General Discussion
    Replies: 8
    Last Post: 11-05-2020, 10:46 AM
  4. Mach3 & V-Carve Problem
    By Ricardoco in forum Computer Software
    Replies: 2
    Last Post: 31-05-2013, 12:53 PM
  5. Mach3 small problem
    By dudz in forum Artsoft Mach (3 & 4)
    Replies: 7
    Last Post: 15-11-2012, 05:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules