step and dir pulse problem Mach3

[JAZZCNC]

Nope still wont spin, also in uccnc when you set the jog why does it always revert back to 10% when you restart.

That is normal and kind of safety feature so you can't jog the machine too fast without first changing the speed.

can get spindle to spin if i type m3s12000

Well, it's working then.? The spindle won't spin unless you give it a speed. M3 is the start command, which turns on the Output which drives the Fwd command on the VFD, and S12000 is the speed. So if you type M3 or push the Start spindle button but haven't given it a speed so and it's at Zero speed then it won't spin but the Output will be active and the FWD command given to the VFD.

Also what plugin do i need to get mach3 to notice the axxb-e.

It's on the CNC drives website but why would you want to use Mach3.? It's shite compared to UCCNC and it's no longer supported.!