Denford Triac Toolchanging Issue

[m_c]

You've got a fancy machine, if you have the air powered enclosure!

The door should be controlled via another solenoid.
And having just had a quick look through the wiring diagrams, there should be GOS (Guard Open Solenoid) and GCS (Guard Close Solenoid), controlled by a GOR and GCR relays.

I'm wondering if your machine has also had the pneumatic vice option fitted, as a quick look at a manual shows it should have it's own regulator below the main input regulator.
Is there a VOS (Vice Open Solenoid) , and corresponding VOR relay fitted?

I'm guessing there are additional M-codes to control those, but I've got no idea what they'll be, although there may be additional configuration options that need set before you get the functionality.

[GingerNinja54]

A fancy paper weight at the minute unfortunately 🤣🤣🤣!

Yes! I’ve got the VOR, as well as DCR & DOR (door closed/open relays?)
Ah! This may also explain something else…
To the right hand side of the column, is what looks like a push fit air fitting, maybe 5or6mm from memory.
Thinking now this could be the air supply for the vice?

Should all of the relays have the LED illuminated when the machine is under power?
Or just when commanded?

Hoping to strip the case of the head over the next couple days, to try and identify the drawbar issue…