Thread: Hello everyone
-
17-11-2021 #1
Hi all, just became a member, although I've looked at the forum as a guest for a while. Proud owner of a very janky homebuilt mill I finished about a year ago and am constantly surprised that it works at all! I'll probably be looking for advice if/when I build an upgrade in the future
Robbie
-
18-11-2021 #2
Welcome, Robbie
Everyone likes a show and tell so why not start a build thread and throw a few pics up.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
24-11-2021 #3
I might do that soon, although I'm pretty busy right now. however, I imagine that you, in particular, might be physically sick seeing it! SBR round rails, and 8mm leadscrews with plastic anti-backlash nuts!
-
25-11-2021 #4An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
-
25-11-2021 #5
-
25-11-2021 #6
Ye, it's no secret I'm not a fan of threaded rod and round rails but if that's all you have then don't worry about it we all have to start somewhere, I just try to steer people around what often becomes the inevitable, it will help someone who is working to a budget and if just one person gains a little knowledge or inspiration to get into CNC from it then in my book it makes you a star builder..
-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks