. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 09-12-2021 #1
    jolyonjenkins's Avatar
    Lives in Bristol, United Kingdom.
    jolyonjenkins
    Last Activity: 17-10-2022 Has been a member for 5-6 years. Has a total post count of 32. Received thanks 14 times, giving thanks to others 0 times.
    Ah our posts overlapped. There is indeed such a transformer. Yes I should probably be powering the board from that.
    Reply With Quote Reply With Quote
  2. 09-12-2021 #2
    dazp1976's Avatar
    Lives in coventry, United Kingdom.
    dazp1976
    Last Activity: 14-01-2024 Has been a member for 6-7 years. Has a total post count of 424. Received thanks 31 times, giving thanks to others 1 times.
    Quote Originally Posted by jolyonjenkins View Post
    Ah our posts overlapped. There is indeed such a transformer. Yes I should probably be powering the board from that.
    Yes.
    There should be 100v output on the trandformer for the sprint. (hopefully, from the drawings). May even still be connected?.
    Now you have all the schematics hopefully you can figure out the driver board for 0-10v control. All below:

    Sprint:
    https://www.transdrive.co.uk/media/1...200-manual.pdf
    Micromill/Novamill:
    https://www.denfordata.com/bb/viewtopic.php?f=36&t=2929
    https://www.denfordata.com/bb/download/file.php?id=2796
    https://www.denfordata.com/bb/download/file.php?id=2795



    Be careful. There's bits in there from both the Micromill and the Novamill.


    Took me most of the bastard morning to research this machine.
    All the info is basically buried.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Boxford 160 TCL -Lenze 534 DC motor Driver Board
    By JohnnyK in forum General Electronics
    Replies: 4
    Last Post: 01-09-2021, 10:22 AM
  2. Sprint 400i DC motor controller wiring
    By Ross77 in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 16-09-2017, 09:19 PM
  3. Driver and board recommendations
    By sternfox in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 25-09-2016, 08:16 PM
  4. WANTED: Routout CNC Driver Board 2.5 amp Single
    By fozziebear40 in forum Items Wanted
    Replies: 1
    Last Post: 29-03-2012, 07:36 PM
  5. New SCR driver board, or new motor & VFD?
    By m_c in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 04-11-2010, 05:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules