Newbie

[JAZZCNC]

Hey - thank you for the input. I think your comments are fair and eerily sum up the majority of my projects in my youth.

The honest answer about the DIY route (no pun intended) is mostly down to cashflow. I can't justify *picking a random number* £1,500 up front for all the parts I need in one go - however I can swallow that number over 6 months and build the project gradually. I think the excitement of the bits arriving every other week is part of the fun - as is when things don't move when they should - or move unexpectedly.

You are welcome and I fully understand, DIY building is very very rewarding when done right but equally can be very frustrating and expensive if done wrong which sadly happens all too often which is why I post and comment on alternatives even though many will think it's just me chasing business which it really isn't.

I actually tread a fine line and am slightly conflicted at times and find it difficult at times because my heart and instincts are with the DIY'er but my business is building CNC machines so more often than not I'm actually talking myself out of potential business when I'm helping the DIY'er but I'd rather lose business than see someone else take the wrong route or design.

I think the JZR9060 would comfortably cater for any guitar body and neck cuts :) If I had an idea and the ability to make a living from the machine - then I'd invest in something prebuilt and proven - but sadly I have neither - yet.

Yes I have a few people who have JZR9060 for making guitars and it's a nice size if space is limited but to be honest the JZR1260 is by far the most common size we build for Luthiers and in general really, though lately, the JZR1212 is very popular. I think the JZR1260 allows larger instruments like Base guitars and cases etc.

This is worth taking a look @
http://www.mycncuk.com/threads/4513-...-router/page66
Its a long read so lots of tea and Hobnobs required.
The information is priceless.
Regards
Mike

Bloody hell Mike that's a blast from the past, I miss my Old mate John S, not many days or weeks go by that I don't think about him. Esp when I'm struggling with something, many a time when I'm chasing a fault or an issue I'll look to the sky and say " Come on John show me where to look, you old Bastard" . . Lol

Word of caution with old threads like this, technology has moved along in the past few years so just take this into consideration when it comes to component selection. Start your own Build thread even now well before building and ask any questions on what's currently available or best in that thread rather than using components in such an old thread as a guide.