Quote Originally Posted by BeagleBrainz View Post
Sorry I come from Linuxcnc.

MDI (not Midi) Manually input g-code.....sorry extra "I" can cause some confusion. Tho someone did write a component for MIDI for Linuxcnc.

Something like G0 X10
then G0 X20
Ok, had me stumped for a while as I play Midi music The Gcode is not a problem for me, I have used it with 3D printing, I will knock up something to try it, not sure if it will prove anything, but we can only try. I have some spare motors so will try swapping one and see if it is the motor or not. Then move to the next faze the driver, I think its called elimination.I can't see it being the motor though.