CNC Rotary table/lathe head indexing

[rooies13]

Hi,

Attached to this post V2.12b firmware.

A couple of minor bug fixes, couple of minor new features and a change to the way the worm ratio is entered, rather than enter a worm ratio (and the device 'assume' a 400 step motor) you now enter the worm ratio multiplied by the step ratio.
E.g for a 400 step motor and a 90:1 worm you'd enter 400 * 90 = 36000.

This change allows odd ratios to be entered.
I'll upload updated instructions shortly.

KWACKERS Do you have the source code of V2.12 and V2.12b?

Thanks

Dennis