Hybrid View
-
29-07-2022 #1
Hi Danny, thanks for your input, I did pretty much what you suggested. I purchased a couple of moving skates for the rear of the CNC and one with 3 wheels for the front, so it could pivot round and they worked great. I was able to move them around from the workshop to the office or studio, (adjoining rooms), whilst preparing the floors with tanking slurry, in readiness for flowscreed. Should have it out and then back in within the next few days, so all going well.
I've noted down your message for moving out of the garage too, cheers.
All the best.
Phill
-
01-08-2022 #2
Hi Guys,
Dont know if this nis how a forum works :S - first time for everything..
We have a Spartan 1325 CNC - supplied by radecal.. the computers beyond repair and i need to make sure i have the correct..
'Machine Configuration Management' and 'Associated Post Processors' - from V CARVE PRO SIDE
Also
'Manufacturer Parameters' - From CNC ROUTER Controlling System
Ive managed to get the software on my new PC and got the cnc being controlled from the PC - but when i send a file to cut the size of the cutting file is way wrong and not located properly on the workplace origin..
Any help would be greatly appreciated - hoping someone might have one and be so kind as to email some files to load up :S - they will be looked after..
Andy
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Piranha PJCM 1325 CNC Router
By Anthony Cutts in forum General DiscussionReplies: 1Last Post: 22-07-2024, 06:41 PM -
3 important Tips for Cutting Aluminum with your CNC Router
By LeonBlack in forum Tool & Tooling TechnologyReplies: 4Last Post: 20-11-2019, 08:53 AM -
BUILD LOG: Build Log: 4'x4' Moving Gantry CNC Router
By GeorgeW21 in forum DIY Router Build LogsReplies: 14Last Post: 20-01-2019, 09:33 AM -
stepmores cnc router 1325
By voyager1972 in forum Chinese MachinesReplies: 1Last Post: 28-05-2017, 04:30 PM -
2008 EM 1325 CNC router
By jegg in forum Chinese MachinesReplies: 2Last Post: 28-01-2016, 11:19 PM
Bookmarks